LV5152DA
HDTV Digital Waveform Monitor

LV5152DA Presentation

• Two Serial Digital Input Systems And One Output System
  Serial digital signal input systems conform to SMPTE 292M, and BTA S-004B standards; active SDI output system to resend the selected SDI input.
• Analog Signal Input System (Y, PB, PR or GBR)
  The analog input system enables the monitoring and then the comparison of the analog to digital signals in waveform, vector and picture modes. Full bandwidth Y, PB, PR may be transcoded and output as GBR.
• Digital Data Dump
  Since parallel digital video data can be displayed in hexadecimal format, the trigger on error is convenient to troubleshoot with.
• Equivalent Cable Length Measurement
  Indicates the serial digital signal level applied to the input connector as the coaxial cable length instead of the actual level.
• Digital Audio Output Conforms To SMPTE 276M
  Digital audio signals are separated from the serial digital signal and output as four AES/EBU pairs.
• Digital Input Error Monitoring
  Error logger and contents display functions for HD-SDI are provided.
• Gamut Error Monitoring
  Monitors incorrect level of signals converted from Y, PB, PR into GBR format.
• Vectorscope (SMPTE 240M, 274M)
  Displays color difference signals in vector format. The HD-SDI signal is decoded to analog GBR, converted into color difference signals with a matrix and displayed in vector format.
• Picture Monitor Output
  SDI signals go through a D/A converter to a component analog signal, which is then output to the picture monitor. Y, PB, PR or G, B, R formats can be selected to match monitor input requirements.
  Component analog signals can be monitored and output as Y, PB, PR or transcoded to GBR.
• Conversion Matrix, Y, PB, PR Into GBR (SMPTE 240M, 274M)
  Selectable waveform format of Y, PB, PR to GBR simplifies signal level monitoring. Additionally, GBR parade order is selectable as RGB.
• Full-line Selector Mode
  Enables the selection and display of video lines from field 1 or 2 or both fields. Since up to 15 lines can be displayed, the waveform is refreshed and displayed with sufficient intensity.
• Measurements Using Cursors
  Level, time and frequency measurements are accomplished with 0.5% accuracy.
• Lissajous Display For Stereo Audio Signal
  Analog stereo audio signals can be displayed in standard X-Y lissajous format.
• Preset Memory Function
  Stores/recalls up to 10 panel settings to reduce setup time by presetting frequently used measurement conditions.
• Timing Display
  The timing display mode can monitor time and amplitude differences between channels in analog and digital modes.